Recommendations
Water used for lawns and gardens does not require softening.
To achieve maximum efficiency from your Series 96:
1. Protect your Series 96, including the drain line, from freezing.
2. If dirt, sand, or large particles are present in your water supply, consult
your Hague dealer for filters that will eliminate this problem.
3. Bypass the appliance(s) if well, plumbing, or pump work is required, and
turn on an outside tap until water runs clear before putting the appliance
back in service.
Control Panel
The Series 96 uses an electronic controller to determine how often the
appliance regenerates and the amount of salt used in each regeneration.
During installation, the control panel is set for your water conditions and the
number of people in your family.
If your electricity is out longer than 17 hours, please reset time of day. All
other settings will be maintained. For information on programming your
electronic controller see pages 8 through 13.
Manual Regeneration
You may want to force your appliance to regenerate if you anticipate using a
large amount of softened water. To manually regenerate the Series 96:
Press and hold the Regenerate button until the screen displays “GOING
TO 1.” This forces the appliance into an immediate regeneration.
The appliance will then follow the regeneration steps: Backwash 1,
Brine/Rinse, Backwash 2, Brine Refill, and then return to the Service
position.
NOTES: ______________________________________________________________________________________
•
•
Series 96 Owner’s Manual
3
NOTE: Performing a manual regeneration
will not affect your normal regeneration
settings.
