Hague Quality Water 700MM Installation And Service Manual Download Page 30

28

Limited Warranty

To Whom Warranty is Extended
This warranty is issued to the original owner at the original 
location site and is not transferable to other sites or to sub-
sequent owners of the appliance.

TO PLACE THE EQUIPMENT UNDER WARRANTY, THE 
WARRANTY REGISTRATION CARD MUST BE COMPLETED
AND RETURNED BY THE ORIGINAL OWNER TO 

Maximizer

®

WITHIN 30 DAYS OF INSTALLATION.

Coverage
This limited warranty covers the 

Maximizer

®

appliances

delivered to the original owner at the original location when the
appliance is purchased for personal, family, or household use. It
is intended to cover defects occurring in workmanship or mate-
rials or both.

Warrantor's Performance and Length of Limited warranty -
Maximizer

®

warrants that upon receipt from the original

owner of any mechanical or electronic part which is found to
be defective in materials or workmanship,

Maximizer

®

will

repair or replace the defective item for 3 years from date
of original installation.

Maximizer

®

further warrants that upon receipt from 

the original owner of any 

Maximizer

® 

media tank / valve

body, brine cabinet, found to be defective in material or
workmanship, Maximizer

®

will repair or replace the defec-

tive item for 10 years from date of original installation.

All defective parts must be returned, along with the equip-
ment serial number and date of original installation, to
Maximizer

®

PREPAID, and replacement parts will be returned

by 

Maximizer

®

to the original owner FREIGHT COLLECT.

FURTHER EXCLUSIONS AND LIMITATIONS ON WARRANTY

THERE ARE NO WARRANTIES OTHER THAN THOSE
DESCRIBED IN THIS WARRANTY INSTRUMENT.
This warranty does not cover any service call or labor costs
incurred with respect to the removal and replacement of any
defective part or parts.

Maximizer

®

will not be liable for, nor

will it pay service call or labor charges incurred or expended
with respect to this warranty.

In the event the water supply being processed through this
product contains bacterial iron, algae, sulphur, tannins,
organic matter or other unusual substances, then, unless
the appliance is represented as being capable of handling
these substances in the product specifications, other special
treatment of the water supply must be used to remove these
substances before they enter this product. Otherwise,
Maximizer

®

shall have no obligations under this warranty.

This warranty does not cover damage to a part or parts of
the appliance from causes such as fire, accidents, freezing,
or unreasonable use, abuse or neglect by the owner.

This warranty does not cover damage to a part or parts of
the appliance resulting from improper installation. All plumb-
ing and electrical connections should be made in accordance
with all local codes and the installation instructions provided
with the appliance. The warranty does not cover damage
resulting from use with inadequate or defective plumbing;
inadequate or defective water supply or pressure; inadequate
or defective house wiring; improper voltage, electrical service,
or electrical connections; or violation of applicable building,
plumbing, or electrical codes laws, ordinances or regulations.

THIS WARRANTY DOES NOT COVER INCIDENTAL,
CONSEQUENTIAL OR SECONDARY DAMAGES.

ANY IMPLIED WARRANTIES ON THE PRODUCT
DESCRIBED  IN THIS WARRANTY WILL  NOT  BE
EFFECTIVE AFTER THE EXPIRATION OF THIS
WARRANTY.

Some states do not allow limitations on how long an implied
warranty lasts or the exclusion or limitation of incidental or
consequential damages, so the above limitations and exclu-
sion may not apply to you. This warranty gives you specific
legal rights and you may also have other rights which vary
from state to state.

Claims Procedures
Any defects covered by this warranty should be promptly 
reported to:

Maximizer

4343 South Hamilton Road,
Groveport, Ohio 43125

In writing about the defects, please provide the original
owner’s name, telephone number and original address, seri-
al number and model number of the product, and date of
purchase .

Maximizer

®

reserves the right to replace defec-

tive parts with exact duplicates or their equivalent.

For Owner’s Reference

Model No. _________________________________      

Equipment Serial No. _________________________________   

Installation Date _____________________________________

Installer’s Signature __________________________________

Summary of Contents for 700MM

































Reviews: