Hagie STS/DPS Series, Operator'S Manual

Page: 45 / 382

2-8
SECTION 2 –
SAFETY AND PRECAUTIONS
EMERGENCY STOP
(E-Stop)
The E-Stop Switch (located on the side
console) provides a quick and positive
method for stopping the engine in an
emergency situation.
When the E-Stop Switch is depressed, it
locks in position and removes the ignition
signal to shut down the engine. To reset the
E-Stop Switch, turn the switch in the direction
of the arrows (located on the face of the
button).
When the E-Stop Switch is activated, a
warning message will appear on the Machine
Display to alert the operator that the E-Stop
is engaged. Press OK to acknowledge.
EMERGENCY EXIT
NOTICE
Do not use the E-Stop Switch for non-
emergency stopping or as a parking
brake.
Rotating Beacon
(Located on front roof cap)
-Typical View
CAUTION
Do not look directly at the glass when
using the Emergency Exit Tool. Failure
to comply may result in personal injury.
E-Stop Switch
(Located on the side console)
-Typical View
E-Stop Active Warning Message
(Located on the Machine Display)