Hagie STS/DPS Series, Operator'S Manual

Page: 118 / 382

SECTION 3 –
CAB
3-66
Once spray tip size is confirmed, a
confirmation message will appear stating that
chemical will expel from the boom. Ensure
there are no bystanders nearby and that
proper personal protective equipment (PPE)
is being worn. Press OK to acknowledge.
After the confirmation message is
confirmed, you will navigate to the “Boom
Prime” screen. A progress bar is shown to
display current system status of the priming
process.
NOTE: Press the Abort Button at anytime to
cancel the priming procedure.
After Boom Prime has finished cycling, a
confirmation message will appear stating that
boom priming is complete and that the boom
is ready to spray.
NOTE: Ensure the Solution Pump Switch
(located on the side console) is in the
UP (On) position and the Tank Valve
Selector Switch (located on the side
console) is in the UP (Main Tank)
position to allow the rate controller
access to the solution pump valve
and solution in the tank.
Air Purge/Priming Shortcut Button
Alternatively , Air Purge and Machine/
Boom Prime may also be enabled through
the Home Page - Road or Field Mode.
•
Press the Air Purge/Priming Shortcut
Button (located on the Home Page -
Road or Field Mode) if neither air purge
Boom Prime: Spray Tip Size Screen
Chemical Will Expel
From Boom Confirmation
Boom Prime Screen
• Progress
Bar
Boom Priming Complete Confirmation