66
V.
OPERATING INFORMATION
Steering Column
To adjust the upper tilt, locate the tilt lock lever on the right-
hand side of the steering column (fig. 5.79); rotate the lever
counterclockwise to release steering column tilt lock. Move
steering column to desired position and rotate lever clockwise to
lock column in place.
To ease cab exit and entry, the entire steering column tilts
out of the driver’s way. To operate the column base tilt, locate the
foot pedal at the base of the steering column (fig. 5.81); push
down on the foot pedal to release the column base lock. Pull or
push the column to the desired position and release the foot
pedal to re-lock the column base.
Auxiliary Power Supplies
The Hagie DTS 8 has two auxiliary power supplies in the cab
for powering 12 volt accessories. They are both “hot” regardless
of ignition key position. Turn the accessory off if the engine is not
running for an extended period of time.
The cigarette lighter-type (fig. 5.81, item 1) and the binding
post-type (fig. 5.81, item 2) power supplies are located in the
panel below the spray system monitor. Replace the insulated
plug when not using the cigarette lighter-type power supply.
Auxiliary power supplies are protected by a 30 AMP circuit
breaker (see page 90).
FIG 5.80
FIG 5.79
FIG 5.82
FIG 5.81
1
2
Summary of Contents for DTS 8 HI-TRACTOR
Page 27: ...NOTES 24 24 ...
Page 115: ...112 X TROUBLE SHOOTING NOTES ...
Page 120: ...117 NOTES NOTES ...
Page 121: ...118 ...
