Page 33/44
05-2021
6LE007528B
WARNING!
Risk of electric shock!
Do not open , repair or modify the battery modules.
Do not touch the battery module with damp hands.
Do not expose the battery modules to damp or liquids.
Keep the battery modules away from children and animals.
Do not clean the battery modules with cleaning solution!
Do not insert foreign objects into the battery modules!
Avoid contact with fluids or vapours leaking from the battery module
ç
CAUTION!
Switch on the battery module with the on / off switch only for commissioning
with the energy management controller XEM461 and after carefully checking
the battery installation.
The batteries are partially charged in their default state. Particular care must
therefore be taken when creating the electrical connection!
ç
Battery module structure
The battery modules are shown below as they are used in the energy storage system:
The battery module consists of the following components (Figure 34).
(10)
(11)
(12)
(13)
(14)
(15)
(16) (17)
(18)
Figure 34: Battery module top view
(10)
+
Jack for battery high-performance cable (orange plug)
(11)
CAN1/RS485
RJ48 jack (battery module connection to the battery controller)
(12)
CAN2
RJ48 jack (slave battery module connection to the master battery module
(only connect for a slave battery module!)
(13)
LED status display battery module
(14)
Handle (attention: not suitable for carrying the battery)
(15)
Potential-free contact (is not used)
(16)
CAN2
RJ48 jack (master battery module connection to the slave battery module)
(17)
SWITCH
Battery module on / off switch
(18)
–
Jack for battery power cable (black plug)
hager.com
Subject to technical changes
flow
Energy storage system
