e
e
29
28
- The device is only intended for use in private households and is not to be
used in conjunction with cookers and hobs as used in commercial kitchens.
- The device is to be used solely for monitoring electric cookers/hobs.
Product characteristics
- Sensor unit with status display via LED
- Display for low battery level via LED
- automatic child protection lock
- Connection for external water leakage sensor (optional, see Accessories)
- Connection for external signal generator via potential-free contact (option-
al, see Accessories)
4 Operation
Operating concept and display elements
In the event of an alarm, the device switches off the electric cooker, hob and in-
forms the user about the alarm situation via LEDs and acoustic signals. For this
purpose, the device has one battery status LED (7), one status LED (5), three
operating buttons (1 ... 3) and two sensors (4).
Colour of status LED (5) Acoustic
signal
Function
green
-
Cooker ready for use
flashing red
yes
Hazardous situation
slowly flashing red
yes
Power supply to cooker interrupted
slowly flashing blue
yes
Water leakage alarm (optional)
white
No
Setting mode 1
purple-blue
No
Setting mode 2
yellow-green
No
Setting mode 3
flashing white
No
Setting mode 4 (normal AUX mode)
flashing red
Setting mode 4 (reversed AUX mode)
Table 1: Meaning of status LED
Colour of battery status LED (7)
Acoustic
signal
Function
flashing red
yes
Battery charge too low, battery
life still approx. 2 weeks.
flashing red
-
Power supply to the cooker/hob is
interrupted, LED flashes until the
battery is completely empty.
Table 2: Meaning of the battery status LED
To avoid false alarms, we recommend:
- wiping the sensor unit with a damp cloth and mild cleaning agent periodi-
cally
- leaving the sensor unit in its position and avoiding unintended movement
4.1 Setting alarm limit
The default setting is to be used for the initial setup. The alarm limit can be
adjusted to the respective environment in the kitchen to ensure optimum
functioning of the device. The alarm limit can be adjusted if false alarms occur
frequently (see Manual Settings). To do this, set the alarm limit two levels high-
er or lower (maximum) as recommended
4.2 Automatic child lock
The automatic child lock is deactivated by default.
Switching on child lock
Keep the operation button (1) pressed for 5 seconds.
Two high acoustic signals (●●) sound and the status LED flashes green
twice. Child lock is switched on.
The automatic child protection is activated about 10 ... 60 minutes after finish
-
ing cooking, in order to prevent the cooker/hob from being switched on acci-
dentally.
Switching off child lock
Keep the operation button (1) pressed for 5 seconds.
A low acoustic signal (●) sounds and the status LED flashes red.Child
protection is switched off.
