TXE530
5
6LE001714A
2.1.2 Connection
1
Spring terminal for power, for solid conductors up to 1.5 mm
2
or for stranded conductors
2
Location for the built-in rain sensor connector on the cover of the housing
3
GPS antenna
4
Terminal KNX +/-
5
Physical addressing button
6
Physical addressing LED
2.1.3 Physical addressing
In order to perform the physical addressing or to check whether or not the bus is connected, press the lighted push button (see
chapter 2.1.2 for the button location).
Light on = bus connected and ready for physical addressing.
Programming mode is activated, until the physical address is transferred from ETS. Pressing the button again, exits programming
mode.
1
2
3
4
5
6
Summary of Contents for TXE530
Page 66: ...TXE530 66 6LE001714A...
