GB
33
3.3 Fault indications
In order not to wake you up, alarms resulting from mains supply problems or
detection head are shut down during the night. Any errors are corrected after
daybreak within 10 minutes i.e. 8 hours after the event.
3.3.1 Power fault
If the
audible
power fault
indication
occurs at an inconvenient time, it can be
postponed for 8 hours over a maximum duration of 7 days by pressing the test button
until you hear the first beep.
IMPORTANT: when the power fault occurs, the detector continues to operate
perfectly for 30 days. It is advisable to replace the detector as soon as possible.
2 flashes every 5 sec.
-
2 rapid beeps every 60 sec.
2 rapid beeps every 60 sec.
Detector at the source
of the fault indication
Other interconnected detectors