GB
28
)
)
)
)
))))))))))))))))
)
)
)
)
))))))))))))))))
)
)
)
)
))))))))
Specific cases
Adding a detector to an existing network
1.
Put the detector to be added to the network in recognition programming mode by
pressing 2 times on the Cfg1 key. The red LED flashes.
2.
Put one of detector that are already in the network in recognition programming
mode by pressing 2 times on the Cfg1 key. The red LED flashes.
3.
Press the test key on a detector that is already in the network until the red LED on
both detectors lights up steadily.
4.
Briefly press Cfg1 on one of the detectors to exit the programming mode.
2.4 Installing the detector as a relay
If the radio range between all the detectors is insufficient, one of the detectors can be
programmed as a relay. This means that it will re-transmit alarms received to all the
other detectors.
Example:
If an alarm is activated on detector 1,
only detectors in radio range limit will
be triggered.
If an alarm is activated on detector 1,
detector 2 programmed as a relay,
will re-transmit alarms received to all
the other detectors.
Radio range limit
Detector 1
)
)
)
)
))))))))))))))))
)
)
)
)
))))))))))))))))
)
)
)
)
))))))))
)
)
)
)
)))))))))
)
)
)
)
))))
)
)
)
)
))))))))
)
)
)
)
))))
)
)
)
)
))))))
Detector 2
Detector 1
