hager tebis TX100, Manual

Page: 10 / 25

TE331 10 6T 8722-02a
■
Example 2: 2 in 1 heat pump (H DHW)
Channel settings:
Channel x: Heating / DHW
Channel y: Sockets with, for example, Ground floor sockets as a label
Channel z: Sockets with, for example, First floor sockets as a label
Others = TIC* - (H DHW + Sockets)
■
Example 3: Heating and DHW production other than electrical
This case can only be configured by ETS.
The "Tele-information" link is a standardised bus used only in France which is used to connect electricity management
equipment to one's electronic meter (EDF). It uses the data availalbe in the meter such as the tariff option subscribed to, the
power subscribed to and the consumption data.
By connecting this interface to equipment, it is possible to monitor the development of one's consumption in real time, to calculate
costs or control equipment according to the tariff.
The function allows the temperature to be measured with an indoor (Ref: EK089) or outdoor (Ref: EK088) temperature sensor.
This additional input has no connection with consumption measurement. It is used to measure temperature without adding
additional devices to the KNX bus and send the measurement to a display interface (measurement range: -30°C to +70°C).
2.4 "Tele-information" Tariff Description
2.5 Description of temperature measurement
Others Sockets DHW / Heating