About the FWU field distributor
20
Technical changes reserved
Top/bottom cable strain relief
At the top and bottom, the FWU enclosure contains a built-in option for attaching
conduits and cables using cable ties. For each 250 mm-wide panel, there are
13 insertion points for cable ties. Thanks to a special guide, cable ties with a
maximum width of 12 mm can be easily pushed into the duct and come out again
on the other side, at the front.
Attaching conduits and cables via insertion points for cable ties
As another option for attaching cables/increasing strain relief, you can also
mount cable strain relief bar FZ850F (see the section entitled “Internal fitting
accessories”).
Attaching conduits and cables to the mounted cable strain relief bar FZ850F
