About the FWU field distributor
18
Technical changes reserved
Dimensions and position
Cable entries at the rear
-
2 cable entries on each side (one at the top and one at the bottom)
-
Can be pushed out from the outside (before installing in the wall)
-
Max. cable entry area: 188 x 51 mm
-
With pre-punched holes that can be cut out to accommodate different cable
routings:
-
5 x Ø16/20 mm
-
4 x Ø25/30 mm
-
1 x Ø30/40 mm
-
Circumferential groove that can be cut out for the flange VZ741 (IP41).
Cutting out must be carried out from the rear (before installation in the wall).
The flange VZ741 (IP41) is installed from the inside.
Knocked-out rear cable entries, on the right with flange
(view from the rear)
