hager FD22ACN, Technical Manual

Page: 76 / 127

Accessories
76 Technical changes reserved
6.2.7 FD00H… = DIN rail Holders for equipment units
FD00H1 : 2x Base element for DIN rail fixation (for surface, flush high-depth and flush low-depth versions)
-
to use as spare part or to complete first two-rows in AN or MN versions or to equip GN versions
-
Part to snap-in on vertical upright and 1x to screw-in each 150mm
-
with 4 standard mounting screws delivered-by
-
Kit to complete with FD00H2 and UZ02B9
FD00H2 : 2x Top element for DIN rail fixation (for surface and flush high-depth versions)
-
to use as spare part or to complete first two-rows in AN or MN versions or to equip GN versions
-
Part to slide-in on base element and 1x to screw-in each 150mm
-
not compatible with flush low-depth versions
-
with 4 standard mounting screws delivered-by
-
For more stability or big deveices, part can be optionally 2x screwed to base element with longer
screws 13mm (also 4x delivered-by in this kit)