hager FB LE Series, Installation And Operating Manual

Page: 22 / 48

Assembly
20 Technical changes reserved

Align the fire safety housing so that it is in a horizontal position on the
wall.
WARNING
An electric shock results in life-threatening injuries or death.
The ventilation system can come into contact with the wall at the back.

Make sure that the fire safety housing is only mounted on
non-conductive surfaces.

Mark out the pilot holes through the fastening lugs at the top.

Make holes for the dowels.

Insert the dowels.

Secure the housing.

If necessary, place the doors back in the hinges.

Seal the side panel connection on the existing wall with silicone.

Make sure the vents at the top and bottom are kept free.