6L
E
00
04
36
A
20
10
25
5
30
15
°
C
EK004, 25507
§
Room thermostat with
1 NO contact
User instructions
The thermostat can be installed either surface
mounted or on a flush box 60 mm.
Cables should arrive from the back.
- take off the front cover
¿
- fix the product’s base
√
through the fixing
holes
¡
- connect the wires on the terminals
¬
- put back the front cover
¿
-
ƒ
indicating light to signal heating.
Technical specifications
Electrical characteristics :
- supply : 230V
쓒
±15% 50/60 Hz
- output : 1 NO contact
8 A - 250 V
쓒
AC1
- consumption : 0,5 VA
Functional characteristics :
- ON/OFF regulation
- static differential < 1K
- dimensions : 80 x 80 x 30
Environment
- operating temperature : 0 °C to +50 °C
- storage temperature : -10 °C to +65 °C
- protection degree : IP 30.
- ecodesign class : 1
Connection
flexible : 1
□
to 2,5
□
rigid : 1,5
□
to 4
□
Electrical connection
Product presentation
Installation
The EK004, 25507 is an electronic room ther-
mostat particularly suitable for heating and / or
air conditioning control.
Temperature’s range limitation
It is possible to limit mechanically the temperature’s
range (between 10° to 20° C for example) or even to
lock the temperature range at a fixed temperature
(20 °C for example).
For that :
1. Take the two range limiting nibs which are found
in the thermostat base.
4. Put back the knob and check that the temperature’s
range is limited to the requested values.
2. Locate the knob to indicate a precise value (20 °C
for example) and remove it.
3. Place the two range limiting nibs.
Installation of the EK004, 25507
thermostat
Install the thermostat at 1,50 m from the floor, on
the internal wall
√
avoiding external influences :
(
¿
extraction fan,
¡
external wall,
¬
sunlight) and
internal influences : (
ƒ
lighting devices,
≈
chimney,
∆
electrical heater).
Seal the conduit to avoid any draught coming from it.
A
external influences
B
internal influences
Ex : to lock the temperature’s range at 20 °C
A warranty period of 24 months is offered on hager products,
from date of manufacture, relating to any material of manufactu-
ring defect. If any product is found to be defective it must be re-
turned via the installer and supplier (wholesaler). The warranty is
withdrawn if :
- after inspection by hager quality control dept the device is
found to have been installed in a manner which is contrary to IEE
wiring regulations and accepted practice within the industry at
the time of installation.
- the procedure for the return of goods has not been followed.
Explanation of defect must be included when returning goods.
Warranty
GB
Adjustable temperature’s range :
Some days after the installation, measure the
room temperature with a reference thermo-
meter.
Draw back the knob and locate it to reach
the same value of the reference thermometer.
20
10
25
5
30
15
∞
C
20
10
25
5
30
15
∞
C
3
4
1
2
5
2
2
2
1
2
6
7
20
10
25
5
30
15
∞
C
1
2
3
4
5
7
6
B
A
EK004, 25507
1,50 m
6
2
1
7
L
N
Heating
L
Mechanical stop
"
