6
1.4.2 Network connexions
Installation behind a DHCP Server
The TJA4X0 is connected to a DHCP server (router or any other device having a DHCP function).
In this case, the server TJA450 automatically waits for an IP address coming from the DHCP (Dyna-
mic Host Configuration Protocol) server.
Installation without DHCP Server
If there’s no DHCP the domovea server waits for 40 seconds and after this time, the server takes the
following default: IP address:
192.168.0.253 with following
Subnet mask: 255.255.255.
!
It’s possible to connect the server directly to
the installer’s PC where the configuration tool
is installed. In this case, after 40 seconds, the
domovea server takes following:
IP address:
192.168.0.253
Subnet mask: 255.255.255.0
The computer shall be addressed as follows:
IP address: 192.168.0.xxx
(with xxx between 2 and 252)
Subnet mask: 255.255.255.0
NB:
If a firewall is active on the local network, the
traffic from clients to the server domovea must
be authorized.
Domovea server uses ports TCP 4504 and
UDP 3702 in reception. The firewall must be
configured to allow incoming traffic through
these ports.
domovea
client
domovea
configurator
www.domovea.com
DHCP
server
LAN
domovea
configurator
LAN
