14
13
3.
To cut, pull the lever down. After the cutting, press the lever back up and carefully re-
move the cut duct parts. For this perhaps the length stopper has to be loosened.
The blade guard has to fold up against the blade automatically after every
cutting procedure. If the cutting can be done only with great effort the blade
is dull or damaged. It has to be exchanged.
4.
To cut covers please (repeat steps 1 and 3).
The rims of the cover must be on top when cutting.
!
!
YES
5
6
Maintenance
1.
Replacement of the blade.
1.1.
To remove the blade, remove the screw (2) and pull the blade straight out (1).
1.2.
Grease the slide faces of the blade (3) with the included multi-purpose grease.
1.3.
To install the knife depress the blade guard (4) and slide the blade (1) back on to the
holding fixture. Then tighten the screw (2).
Do not transport or store the blade without suitable cut protection.
!
4
1
3
2
