4600 SERIES CONCEALED VERTICAL ROD EXIT DEVICE
INSTALLATION INSTRUCTIONS FOR ALUMINUM DOORS
I
-
ED01933
Hager Companies 139 Victor Street, St. Louis, MO 63104 (800) 325
-
9995 www.hagerco.com
12. DOGGING DEVICE
A.
For increased life of the device, dog the push bar down during high traffic periods of the day. Dogging is not
available on fire
-
rated models.
B.
Hex Wrench Dogging:
To dog the device, press the push bar, insert the hex dogging wrench and turn clockwise 35 degrees. The
push bar will remain depressed and the latch will stay in the Door Open Position. (See Figure 12
-
1) To re
lease the dogging, hold the push bar down, insert the hex dogging wrench and turn counter
-
clockwise 35 de
grees. The push bar will return to the up position and the latch will actuate to lock the door.
C.
Cylinder Dogging:
Required hardware for cylinder dogging includes one (1) mortise cylinder, lengths
1
-
1/8”, 1
-
1/4”
or
1
-
3/8”
with a standard cam
(0.723”
[18mm] screw center to tip of cam): and one (1) Hager Cylinder Dogging kit
(4925C) which includes one (1)
11/32”
[8.7mm] solid cylinder collar and cashbox nut. (See Figure 12
-
2)
Remove and discard the hex wrench extension. (See Figure 12
-
3) The cylinder should be oriented so the cam
is pointing away from the exit device push bar. (See Figure 12
-
4) Install the dogging cover plate with the
cylinder and test the dogging. (See Figure 12
-
5) Depress the push bar, insert the key and turn the key
clockwise to dog the device. Turn the key counter
-
clockwise to release the dogging.
Figure 12
-
1
Figure 12
-
2
Figure 12
-
3
Figure 12
-
4
Figure 12
-
5
Rev 3, Rev Date: 2/13/20
Page 10 of 10
