-
20
-
Pause (time) Setting
A different pause length can be selected (for example needed if you operate through PABX)
1.
After confirming the PIN code, press ‘Up’ or ‘Down’ key until you reach PAUSE, then
press
key.
2.
Press ‘Up’ or ‘Down’ to select either 1, 2 or 3 seconds then press
again to
confirm.
Factory default setting is 3 seconds
.
PIN change
Your phone has a 4-digit PIN for protecting its settings. The default setting is ‘0000’ and
you can change your PIN code for security purposes.
1.
After confirming the PIN code, press ‘Up’ or ‘Down’ until 'PIN CHANGE' is displayed,
then press
.
2.
'Old PIN' is displayed, type in your current PIN (0000) and then press
.
3.
'New PIN' is displayed. Enter the new 4-digit PIN and then press
.
4.
Press
to store the setting. A beep is are heard for confirmation.
