![HAGENUK Venga 300 Instruction Manual Download Page 10](http://html1.mh-extra.com/html/hagenuk/venga-300/venga-300_instruction-manual_3192069010.webp)
-
10
-
Chapter-3: Handset
Preparatory dialing (pre-dialing)
1.
Enter the number (Up to 32 digits). You can use the ‘Clear’ key to
make corrections by deleting the last digit entered. If the number
entered is longer than 16 digits, the display will scroll the number to
the left to show the last digits.
2.
Press the
key to dial out the number in PSTN-mode.
3.
To hang up, press
key or return the handset to the charger. The call duration
will be displayed for 5 seconds after the call.
Redialing
1.
In standby, press the ‘Redial/Scroll’ key on the handset. The last dialed number will be
displayed. Use 'UP' or 'Down' keys for choosing the redial number (max. 10 redialed
number stored).
2.
Press the
key to initiate the call.
3.
It is also possible to redial in off hook-mode. In off hook-mode, press ‘Redial/Scroll’ key
followed by 'Up'/'Down' for choosing the redial number. Now press
again to
start the call.
Saving a redial number to your phonebook is possible, please refer to CID chapter (page
28).
Making a call using the phonebook
1.
Press the
key on the handset.
2.
Press ‘Up’ or ‘Down’ to scroll through the list of phonebook entries. If the number is
longer than 16 digits, press ‘Scroll’ to see the rest of the digits.
3.
Or enter the first character of the name you are searching for (e.g. press # 5 for K). The