-
19
-
2.
Enter the pre-fix code (e.g. digit 9, and up to 4 digits) and followed by the
key.
3.
If you call the following number (eg. 85734), the unit will add the code 9 to the
number (becomes 985734).
Temporarily deleting a pre-fix code before a call is possible by pressing and holding
key (~2s) until a beep is heard. Enter a number and press ‘Talk’ key, the unit
dials out the number without the pre-fix code. For any next call, the set pre-fix code
will become active again.
The PABX pre-fix code can be removed by the following operation:
1.
After confirming the PIN code, press ‘Up’ or ‘Down’ until PABX is displayed, then
press
key.
2.
Press
key to clear the PABX number and press
key to confirm.
Recall (Flash) time
1.
After confirming the PIN code, press ‘Up’ or ‘Down’ until ‘Flash Time’ is displayed,
then press
key.
2.
The currently set recall time will be displayed with ‘*’. You may press ‘Up’ or
‘Down’ to select one of the different options. Please press
key to confirm.
Possible flash times are: 100 ms, 120 ms, 270 ms, 300 ms, 375 ms, 600 ms and 800
ms. Be careful before changing the setting. Consult your service provider if you
are not sure which recall/flash time is common.
