background image

5. WARRANTY AND LIMITED LIABILITY 

Hagan

 warrants to the initial purchaser that “ZR” bindings will be  free  from material 

and  manufacturing  defects  for a  period  of  two (2) years from  the date  of  purchase. 

Hagan 

refuses  any  and  all  other  express  or  implied  warranties.  This  guarantee 

applies  only to  the  original  buyer.  The  guarantee does  not  cover  damage  or faults 
caused  by use different from  that indicated in these  instructions or in the guarantee, 
nor  by modifications  or negligence.  The  warranty  does  not cover  damage  caused 
by incorrect assembly of  the  binding.  There are  no  other express  guarantees  apart 
from  those  described. 

Hagan

  is  not  responsible  for direct  or indirect  damage  or 

expenses  incurred while using, or by the inability to  use,  our equipment. 

Hagan 

will 

not  take  any responsibility for losses or compensation requests  on  behalf  of a third 
party  which  could  derive  from  the  binding’s  use.  In  case  of  material  defect,  the 
costumer  has  the  right  to  repair  or  substitution  of  the  item  or  of  part  of  it,  in 

Hagan’s

  discretion.  In  order  to  receive  the  services  offered  by the  guarantee,  the 

costumer must obtain  authorization from an authorized dealer.  This limited  warranty 
applies  only to  items  which  have been used  in  an  appropriate  way and  which  have 
been  properly  maintained.  The  guarantee  is  not valid  for items  damaged  or worn 
during  normal  use.  Defects  that are  repaired  under warranty must  be accompanied 
by proof of purchase and a “REQUEST FORM” issued by an authorized dealer.

Hagan advises that the pictures and descriptions included in this user’s guide are 

illustrative only. Hagan reserves the right to modify or delete each product or 

process described in this user instructions manual.

Summary of Contents for ZR











Reviews: