…moves mountains
(EN) ENGLISH
Thank you for choosing the Hagan ZR.
Hagan ski touring bindings are constructed using the most sophisticated design principles
and advanced engineering standards. Hagan bindings are completely made in Europe to
satisfy the needs of top athletes who are constantly looking for lightness and reliability. For
your interest and for safety reasons we ask you to read the following instructions carefully
and to act accordingly.
BEFORE PERFORMING ANY OPERATION, MAKE SURE YOU FULLY UNDERSTAND
THESE INSTRUCTIONS
GENERAL WARNINGS AND RECOMMENDATIONS:
•
Hagan ZR bindings are designed and tested to work with ski boots with "TECH" inserts.
The Tech inserts must be standard hooking plates in original dimensions without excess
wear. Using ski boots with non-standard inserts or with very worn inserts may change the
bindings functionality and can create a risk for the user. Before each use check the general
wear of equipment and, in case of doubt, contact an authorized dealer.
•
Hagan ZR
bindings
do not comply
with DIN/ISO standards regarding safety; Hagan ZR
are extreme racing bindings and do not have any system for calibration of the release
system.
•
During transport, dirt or salt can infiltrate the bindings and interfere with correct
functioning. Always protect the bindings from these external agents during transport.
•
In the up-hill setting the bindings do not have any release function and are completely
locked on the boot.
•
Upon stepping into the toe piece, check that the pins are correctly and completely
inserted into their seats on the boot toe.
•
Before skiing downhill, please remember to place the toe locking lever in downhill
position. Failing to do so will increase the risk of injury for the user.
•
Before each use check that the binding or other accessories do not have worn or
damaged parts, that the release system is correctly working and that the binding is not
contaminated by dirt, debris, snow or ice. If there are some defected or broken parts
please contact an authorized dealer
Hagan for the service
.
•
Never use bindings with damaged or extremely worn parts.
Summary of Contents for ZR
Page 9: ...ILLUSTRATIVE PICTURES...
