- HEEL
ADJUSTMENT PLATES —
Hagan adjustment plates: ultra-light plates that allow
adjusting the heel position by 30 mm or 60 mm.
- CRAMPONS —
This ultra light accessory can be installed on the ZR binding through the
integrated crampon system.
HOW TO USE CRAMPONS
WARNING: THE CRAMPONS MUST BE USED ONLY IN CERTAIN SNOW
CONDITIONS; USING CRAMPONS IN WRONG SNOW/GROUND CONDITIONS
COULD DAMAGE THE CRAMPONS OR THE BINDINGS AND CAN CAUSE RISK OF
INJURY FOR THE USER.
•
Place the crampon in the crampon hook, positioning it at 90° to the ski. (
picture U
)
•
Once correctly inserted, rotate the crampon to obtain the position in
picture V.
The use of other than Hagan accessories can compromise the working features of the ZR
binding. We advise using original accessories only and having them installed by an
authorized dealer.
4. CARE, MAINTENANCE AND STORAGE
•
Periodically lubricate the joints or rotation points of the Hagan ZR binding with
waterproof silicon-based grease to preserve optimal performance.
•
Check the status of the bindings before each use — especially the contact elements
between the boot and binding. If in bad condition or excessively worn, they should
be replaced.
•
If the ZR bindings are stored for a long period of time, have them checked by a
specialized dealer before re-use.
•
Carefully clean the binding after each use with water to remove dirt, salt, sand or
debris. Do not use high pressure sprayers or harsh chemical solvents.
•
Store skis in a dry place, avoiding excessive heat, with the toe piece in the “closed”
position to preserve the elasticity of the springs.
•
Do not modify the ZR binding. Any tampering or change can compromise the
binding’s functionality and raise the risk of injury. Modifications will cancel the
warranty.
Summary of Contents for ZR
Page 9: ...ILLUSTRATIVE PICTURES...
