9
NOTE:
If the coffee machine malfunctions or other reasons cause it to not work
properly, it is forbidden to power on again. please take the coffee machine to the service
provider for testing and repair.
Maintenance and cleaning
To clean the outside of the machine:
1. Unplug the power plug and cool down the machine before cleaning.
2. Clean the surface with a clean soft cloth, and do not use hard or wet cloth.
3. Please pay attention to the sharp needle in the machine’s brewing chamber to avoid
injury.Take out the used capsule container, remove the cover, wash it with clear liquids or
water.
Description of each state of the machine
Storage and operation environment
State of the machine
LED Indicutor state
Plug in the power supply
then entry power saving mode
LED1 and LED2 turn on twice and then
turn off
Press the button to preheating (initial
use)
LED1 and LED2 lights flash slowly
Heating befor brewing
LED1 or LED2 lights flash slowly
Making coffee
LED1 or LED2 lights always on
NTC error
LED1 and LED2 flash quickly
Indicator light doesn’t work
•
Check the power supply ,and check
the plug is correctly collected into the
socket
Water shortage in the water tank at
Making coffee
LED1 or LED2 lights flash quickly
Brewing finished or standby
LED1 and LED2 lights always on
Use environment
1. Please store the machine out of reach by children.
2. Please use it in a dry place, not in high temperature or sunlight.
3. Relative altitude: < 6000 ft (1828 m)..
4. Operating environment temperature: 0-40
5. Operating relative humidity: 10% ~ 95% RH
Transportation and storage condition
1. Temperature of transportation and storage environment: 0-60
2. Allowable relative humidity: 10% ~ 90% RH
3. To be placed in a clean and dry place, do not put in high temper ature or sun exposure.
