background image

2

1

   

   

 Instructions. 

U

 

   

wing safety guidelines to help protect your lift from potential damage and to en-

sure your own personal safety. 

  Read all the installation instructions before testing or installing your lift. 

  Read and follow all safety instructions. 

  Keep remote control and manual rocker switch out of reach of children. 

  To prevent bodily injury keep hands and clothing away from the lift while the lift is in 

operation. 

  Before installing the lift or working with its connections, unplug the lift from the elec-

tricity main supply. 

  Do not install the lift, power supply or R.F. module in places subject to high tempera-

tures for example near a radiator, or heating vent.  

  The TV lift must only be mounted in a dry area and it must be ensured before use that 

the lift is safe or protected from liquid contact or spillage. 

  To avoid damaging the power supply, R.F. module and power cord, do not put any-

thing on it or place it where it could become damaged. 

  Unplug the lift in the following conditions: 

  When the power cord or plug is damaged or frayed. 

  If the lift, power supply or RF module has been exposed to rain or wa-

ter or any liquid contamination whatever.

  If the lift exhibits a distinct change in performance, indicating a need 

for attention.  

  MANUFACTURES who build this lift into other products or use it with other products, 

MUST make sure to prevent bodily injury. The MANUFACTURER of the final product 
is responsible to give the end user proper warnings and instructions for use. 

 

 Before you begin any of the Installation procedures (4. Installation.), 

read and follow the warnings and safety instructions on this page. 

 

 

 ! THIS IS NOT A TOY ! 

 

 

 ! CHILDREN SHOULD NOT OPERATE LIFT OR 

REMOTE CONTROL ! 

Summary of Contents for 421.68.44











Reviews: