6
4. Installation
1) Remove all contents from packaging and compare with parts list.
2) Place the lift unit (#1) on e.g. the back panel of the cabinet** in a location that will allow
full up and down movement of the lift.
3) Fasten the unit securely to the cabinet. Screws must be appropriate for the material
being used.
4) Connect the plugs from lift unit (#1) and power supply (#10) to R.F. Module (#5).
Please also refer to the separate user instruction for the remote unit, next page.
5) Mount rocker switch (#9) in an easy location by cutting a ø30 hole and pressing the
switch into place. Secure excess wire to keep away from moving parts.
6) Plug the power cord into main electrics and add minimum 5 kg and operate manual
rocker switch.
Helpful hint:
Mount TV lift and electronics to plywood panel and attach to inside back of
cabinet using appropriate number of screws. This allows all components to be removed from
the cabinet if necessary. If this is not possible, create an access panel to the electronics.
** Aim to create access for wear and tear replacement stroke service.
