28
CURE YOUR APPLIANCE WHEN NEEDED
If a fault occurs, before calling the after-sales service, please ensure that is not because of
incorrect operations and refer to the fault table, attempt to correct the fault yourself. You can
often easily rectify technical faults on the appliance yourself.
If a dish does not turn out exactly as you wanted, you can find many tips and instruc tions for
preparation at the end of the operating manual.
Fault
Possible Cause
Notes/remedy
The appliance
does not work.
Faulty fuse.
Check the circuit breaker in the fuse box.
Power cut
Check whether the kitchen light or other kitchen
appliances are working.
Knobs have fallen
out of the support
in the control
panel.
Knobs have been
acci- dentally
disengaged.
Knobs can be removed.
Simply place knobs back in their support in the
control panel and push them in so that they engage
and can be turned as usual.
Knobs can no
longer be turned
easily.
There is dirt
under knobs
Knobs can be removed.
To disengage knobs, simply remove them from the
support.
Alternatively, press on the outer edge of knobs so
that they tip and can be picked up easily.
Carefully clean the knobs using a cloth and soapy
water. Dry with a soft cloth.
Do not use any sharp or abrasive materials. Do not
soak or clean in the dishwasher.
Do not remove knobs too often so that the support
remains stable
Fan does not work all the time in the
mode: “Fan Heating”
This is a normal operation due to the best possible
heat distribution and best possible performance of
the oven.
After a cooking process a noise can
be heard and a air flow in the near of
the control panel can be observed.
The cooling fan is still working, to prevent high
moisture conditions in the cavity and cool down
the oven for your convenience. The cooling fan will
switch off automatically.
