15
Steam cleaning function
This function use steam to soften scales inside the cavity which make the cavity easier to clean.
1.
Power up the system, Push and take out water box. Inject 1000ml fresh
water into the water box.
2.
Push the water tank into the appropriate location of the appliance.
3.
In standby mode, touch “A “button for several times until the screen display “A11”
which means the oven enters steam clean function. Time area shows default time “05:00min”.
4.
Press “
“ to start the program.
Steam cleaning function
For best cleaning results, we recommend that you use detergent sodium citrate, which were
randomly for descaling steam oven. Follow the manufacturer’s instructions on the packaging. It
is suggested that descaling function should be used after the steam function has been run for
20 hours.
1.
Power up the system, remove the water tank, inject 1000ml of fresh water into the
water tank, adding a pack of descaling agent.
2.
Push the water tank into the appropriate location of the appliance.
3.
In standby mode, touch” “button for several times until the screen display “A10”
which means the oven enters auto scale removal function. “min” and default time “40:00”
lighten, tank icon show the current water level ( Water, lack of water, full of water ), other icons
disappear.
4.
Press “
“ to start the program.
5.
When the remained time counts down to 10:00, the program is paused and reminds
lack of water. Take out the water tank and pour the water in the tank. Thoroughly clean the
water tank.
6.
Replace the water, repeat steps 3 to 4.
Notes
Time of steam clean cannot be adjusted. Press pause key or open door the clean process will
paused. Close the door and press start key cleaning process will restart.
Notes
The descaling process shall not be shut down. If the descaling process shut down before the
end, the entire program must be started from step 3.
