38
ENERGY EFFICIENCY ACCORDING TO EN
Please note the following information:
1.
The measurement is carried out in the “ECO” mode to determine the data regarding
the forced air mode and the label-class
2.
The measurement is carried out in the “Top & Bottom Heating” mode to determine
the data regarding the conventional mode
3.
During the measurement only the necessary accessory is in the cavity.All other parts
have to be removed
4.
The oven is installed as described in the installation guide and placed in the middle of
the cabinet
5.
It is necessary for the measurement to close the door like in the household, even
when the cable disturbs the sealing function of the gasket during the
measurement. To make sure, that there are no negative effects regarding the disturbed sealing
due to the energy data, it is necessary to close the door carefully during the measure- ment.
It is may be required to use a tool to guaranty the sealing of the gasket like in the household,
where no cable disturbs the sealing function.
6.
The determination of the cavity volume carried out for the usage “Defrost” as de-
scribed on page 14. To ensure an efficient use of the oven, all accessories including side-racks
are removed.
