Häfele 533.23.320, User Manual

Page: 12 / 64

EN9
4. BEFORE USING THE
APPLIANCE
4.1. Preparing your dishwasher for
first use
Make sure the electricity and
supply water specifications match the
values indicated in the installation
instructions for the machine
Remove all packaging material
inside the machine.
Set the water softener level.
Fill the rinse aid compartment
4.2 Salt usage (IF AVAILABLE)
For a good washing function, the
dishwasher needs soft, i.e. less
calcareous water. Otherwise, White lime
residues will remain on the dishes and
the interior equipment. This will negatively
affect your machine’s washing, drying
and shining performance. When water
flows through the softener system, the
ions forming the hardness are removed
from the water and the water reaches
the softness required to obtain the best
washing result. Depending on the level
of hardness of the inflowing water, these
ions that harden the water
accumulate rapidly inside the softener
system. Therefore, the softener system
has to be refreshed so that it operates
with the same performance also during
the next wash. For this purpose,
dishwasher salt is used.
Machine can only be used by special
dishwasher salt to soften the water. Do
not use any small grained or powdered
type of salts which can easily soluble.
Using any other type of salt can dam-
age your machine.
4.3. Fill the salt (IF AVAILABLE)
To add softener salt, open the salt
compartment cap by turning it count-
er clockwise. (1) (2) At first use, fill
the compartment with 1 kg salt and
water (3) until it is almost overflowing.
If available, using a funnel (4) will
make filling easier. Replace the cap
and close it. After every 20-30 Cycles
add salt into your mach until it fills up
(approx. 1 kg).
Only add water to the salt compart-
ment on first use.
Use softener salt specifically produced
for use in dishwashers.
When you start your dishwasher, the
salt compartment is filled with water,
therefore put the softener salt in prior to
starting your machine.
If the softener salt has overflowed and
you do not start the machine immedi-
ately, run a short washing program to
protect your machine against corrosion.
3 4
1 2
SA
LT