Häfele 533.23.320, User Manual, Page: 29 / 64

EN26
The installation and repairing procedures should always carried out by the Autho-
rised Service Agent in order to avoid possible risks. The manufacturer shall not be
held liable for damages that may arise from procedures carried out by unauthorised
persons. Repairs may be carried out by technicians only. If a component has to be
replaced, ensure that only original spare parts are used.
Improper repairs or use of non-original spare parts may cause considerable damage
and put the user at considerable risk.
Contact information for your customer service can be found on the back of this
document.
Function-relevant genuine spare parts according to the corresponding Ecodesign
order can be obtained from Customer Service for a period of at least 10 years from
the date on which your appliance was placed on the market within the European
Economic Area.
1. When the machine isn’t in operation:
Disconnect the plug and close the tap.
Leave the door slightly open to prevent odour formation.
2. Select the dry option to remove water droplets.
3. Place dishes in the machine properly to achieve the best energy consump-
tion, washing and drying performance. Please see the programme and consump-
tion table for more information.
4. Rinse dirty dishes before placing them in the dishwasher.
5. Only use the Prewash programme when necessary.
6. Do not place the machine near a refrigerator because it will reach high
temperatures.
7. If the machine is located in an area that is at risk of freezing, close the tap,
disconnect the inlet hose from the tap and drain the water inside the hose and the
machine completely.
10. PRACTICAL INFORMATION