12
OPERATION MANUAL
The full-load current rating is the amperage a machine draws when running at 100% of the out-
put power. Where machines have more than one motor, the full load current is the
amperage drawn by the largest motor or a total of all the motors and electrical devices that
might operate at one time during normal operations.
Full-Load Current Rating for these machine at 240V is 6.0 Amps
It should be noted that the full-load current is not the maximum amount of amps that the
machine will draw. If the machine is overloaded, it will draw additional amps beyond the
full-load rating and if the machine is overloaded for a long period of time, damage, overheating,
or fire may be caused to the motor and circuitry.
This is especially true if connected to an undersized circuit or a long extension lead. To reduce
the risk of these hazards, avoid overloading the machine during operation and make
sure it is connected to a power supply circuit that meets the requirements.
3.6 FULL-LOAD CURRENT RATING
4. OPERATION
4.1 CONTROLS (FIG.4.1)
F
ig
. 4.1
A
B
C
D
E
A. OFF Button.
When pressed the motor and blade
are stopped.
B. ON Button.
When pressed energizes the electrical system
ready to operate when the trigger is depressed.
C. Emergency Stop.
When pressed all electrical operating
items will stop. To allow the machine to restart the red
button needs to be twisted to allow the button to pop up.
Now the start button will operate.
D. Coolant Switch.
Switches on or off the coolant pump.
E. Speed Control.
When turned adjust the speed of the
blade in mtrs/min
Page 12
Instruction Manual for EB-260V (B062V)
04/04/2019
