Hafco AL-320G, Operation Manual, Page: 4 / 42

4
SAFETY PRECAUTIONS
Safety glasses must be worn at
all times when using the lathe.
Earmuffs should be worn
when noisy applications are
operating
Gloves must not be worn
when using this machine.
Avoid wearing loose clothes,
rings and loose jewelry
Appropriate footwear with
substantial uppers must be
worn
Do Not operate the machine
until the manual has been
read and understood.
Safety Checks Before Operating
1. Check workspaces and walkways to ensure no slip/trip hazards are present.
2. Locate and ensure you are familiar with the operation of the ON/OFF button
3. Ensure all guards are in place.
4. Check that the job is clamped tight in the chuck.
5. Remove all tools from the bed and slides of the machine.
6. Ensure correct speed for machining process is selected.
7. Remove the chuck key before starting the lathe.
8. Do not try to lift chucks or face plates that are too heavy for you.
9. The lathe should not be used if faulty
Safety Checks While Operating
1. Never leave the lathe running unattended.
2. Before making adjustments or measurements switch off and bring the machine to a
complete stop.
3. Do not attempt to slow/stop the chuck or revolving work by hand.
4. Avoid letting swarf build up on the tool or job. Stop the machine and remove it.
5. Always remove the chuck key from the chuck.
6. Do not store tools and parts on top of the machine.
Potential Hazards
q
Flying objects - chuck key left in chuck
q Cutting tool injury when cleaning, filing or polishing
q
Rotating machine parts - entanglement
q
Metal splinters/swarf
q Eye injuries
Page 4 Instructions Manual for AL-320G (L141) 07/02/2018