14
OPERATION MANUAL
5. OPERATION
This machine may perform many types of operations that are beyond the scope of this manual.
Many of these operations may be dangerous or deadly if performed incorrectly.
The instructions in this section are written with the understanding that the operator has the
necessary knowledge and skills to operate this machine. If at any time you are experiencing
difficulties performing any operation, stop using the machine!
If you are an inexperienced operator, we strongly recommend that you read books, trade
articles, or seek training from an experienced operator before performing any unfamiliar
operations.
Above all, your safety should come first!
To use metal dust collector:
1. First turn the metal dust collector ON.
2. Turn dust-producing machine ON and perform the operation.
3. When shutting down first turn the dust-producing machine OFF when the operation is
complete.
4. Turn metal dust collector OFF when finished with the operation and check or clean the
collecting drawer. Empty drawer and tray when they are approximately 1⁄3–1⁄2 full.
5.2 OPTIONAL ACCESSORIES
5.1 OPERATING OVERVIEW
DCH-100F - Flame Retardant Dust Hose 100mm x 4Mtrs.
(Order Code: W322A)
DCA-100C - Dust Hose Shut Off Valve 100mm
(Order Code: W335)
REPLACEMENT FILTERS
Stainless Steel Mesh Filter
1st Stage
(Order Code 3CP1025)
Active Carbon Filter
2nd Stage
(Order Code 3CP1024)
Pleated Micro Filter
3nd Stage
(Order Code 3CP1028)
