11
- Replace the screw (S) after oil completely flows
off.
- Filling in gear oil from T hole, until oil be sight
from the visual glass.
- Replace hole using the fill hole (T).
- Replace hex head screw (U).
8 TECHNICAL
CHARACTERISTICS
8.1
Table of cutting capacity and technical details
8.2 NOISE
TESTS
The test was held under environmental noise levels of 65db. Noise measurements with the machine
operating unload was 71db. Noise level during the cutting of mild carbon steel was 73db.
NOTE: with the machine operating, the noise level will vary according to the different materials being
processed. The user must therefore assess the intensity and if necessary provide the operators with the
necessary personal protection, as required by Law 277/1991
16
Instruction Manual for BS-321AS (B034A)
31/03/2016
Summary of Contents for BS-321AS
