4
Safety Instructions
The equipment should only be used by
trained operators, who know the function of
the unit well.
The installation of the working area has to
correspond to the relevant regulations. Set up
the unit in such a way, that the louvers are
not covered and the extracted air can escape
well.
To avoid the risk of an electric shock, this
device might only be connected to a power
supply with protective conductor.
If you pull the power plug, it will stop the
connection to the mains power supply. Set up
the unit so that the power plug is always
accessible. The power switch should also
always be easily accessible.
Only switch on the unit if the handpiece rests
secured in the handpiece holder, or if you
hold it safely in your hand.
Prevent the permeation of liquids into the
control unit. The electronic elements could be
damaged. Clean the outside of the box only
