16
Application
Infilling the Spray Liquid
Switch off the device. Pull out the
spray tank on its handle. Hold the
cover of the tank in hand and un-
screw the tank. Now fill it with dis-
tilled water and anti-germ liquid,
e.g. AquaHy (art. 8555).
Do not exceed the maxi-
mum level when filling the
tank.
Now turn the tank cover back on the
tank. While screwing back the cover
on the tank, make sure that is
closed correct. Otherwise there will
no pressure be built up. Put the
tank back in the housing. Switch on
the power switch in the rear of the
unit.
Attention: Never use tap
water (Danger of calcifica-
tion!). Also, do not use ex-
plosive or combustible liq-
uids, e.g. alcohol.
Note: The filter in the tank
(art. 3479) should be fully
under pressure, otherwise
no water will be sucked in.
The water filter has to be
fully under water, otherwise
no water will be sucked in.
Insert Bur
The handpiece is equipped with a
chuck which can hold all burs with a
diameter of 2.35 mm and usually
are used in the fields of podiatry. To
open the chuck, push the black
knob forward with your thumb and
leave it there.
Now insert the tool as far as possi-
ble. Pull back the black knob and
the tool will be clamped.
For security reasons, only
change the tool if the
handpiece is turned off.
