AUTOMATIC SAFETY CUT OFF
An automatic safety cut off is fitted to the kettle for your protection.
This is to protect against dry boiling. It will operate if the kettle is
switched ON when there is insufficient water inside the kettle. If this
should occur, switch the kettle OFF and removed the power cord from
the power outlet. Allow cooling for 10minutes then refill with cold
water before plugging back in to the power outlet.
CLEANING & MAINTENANCE
Always disconnect the appliance from the power outlet and leave
it to cool down completely before cleaning. Clean the exterior of
the product by wiping with a slightly dampened (not wet) soft cloth.
Remove stubborn spots with a cloth moistened (not wet) with a soapy
water or a mild, non-abrasive cleaner. Avoid the use of scouring pads,
harsh detergents, solvents, polish abrasive or aerosol cleaners as they
may damage the surface of the product. Dry with a clean, soft cloth
before storage, or reconnecting to the power.
DESCALING
Regularly removing deposits of lime scale from inside the kettle
will prolong your kettle’s life, ensuring maximum performance
and energy savings. The kettle can be descaled using commonly
available descaling products. In this case, leave the product to act,
then rinse thoroughly.
Then boil at least two full kettles of water, disposing of the boiling
water safely, to remove any residue of the product before use.
www.h
aden.com
www.hadenappliances.com
08
