5.52.194.00.01.04
13
Pos : 17.2.1. 2 /1_H ADEF /---ALLG EMEIN/Hinweis e/ Kett en/ VO RSICH T - Ket ten: Kei n F ett , ohne Schmi erung kei ne Haft ung @ 0\ mod_1177481784104_52. doc x @ 5349 @ @ 1
CAUTION!
Do not use grease for lubrication of load chain.
Without lubrication, manufacturer's warranty and/or liability will be void.
Pos : 17.2.1. 3 /1_H ADEF /14-WARTUN G/ Ket tenz ug/Las t kett e/ 01- 1.U mlenkr ollen-Sc hmier ung @ 1\ mod_1271680090245_52. doc x @ 13447 @ @ 1
13.2
Pulleys
Pos : 17.2.2 /1_H ADEF /14- WARTUN G/ Kettenz ug/ Las thaken/02. Last haken - Schmi erung @ 0\ mod_1173364066362_52. doc x @ 594 @ @ 1
13.3
Load hook
Check bearings and pulleys yearly
Clean and lubricate the bearings of hooks and pulleys with grease
Slight bearings are maintenance free
When bearings resp. slight bearings are worn of, change the complete pulley
Pos : 17.2.3. 1 /1_H ADEF /14-WARTUN G/ Ket tenz ug/G etri ebe/ 03.G etriebe - allgemei n - R atsc hz üge+H @ 0\ mod_1178715621434_52. doc x @ 5796 @ @ 1
13.4
Gear
Regular checks of lubrication are necessary. The teeth must be cleaned and re-lubricated after approx. 3
years. We recommend to use a lubricant of class EP2 or similar products. In case of severe conditions of
use (e.g. dust, regular lifting of the nominal load,etc.), please shorten maintenance intervals.
Pos : 17.2.4. 1 /1_H ADEF /14-WARTUN G/ Las tdr uc kbrems e/ Brems e - allgemein - Alle H -Kett enzug, Wi nde @ 0\ mod_1178717565600_52. doc x @ 5818 @ @ 1
13.5
Gear spring pressure brake
During the check, brake lining wear is verified. The brake linings must be replaced when the wear limit is
already reached at one position of the lining, - as this can be the case when wear of the linings is irregular.
CAUTION!
The brake linings must be free from fracture. Avoid oil, grease, dirt and humidity on the brake linings as this
increases wear.
Pos : 17.2.5 /1_H ADEF /14- WARTUN G/ Kettenz ug/Ü berlastsic her ung/ Alle Warnhi nweis @ 1\ mod_1265798044127_52.doc x @ 11972 @ @ 1
13.6
Overload protection
DANGER!
The factory setting of the overload protection/slipping clutch is secured by sealing. In case of any changes
will void the warranty. Should maintenance be necessary, please contact a service company authorized by
the manufacturer.
Pos : 17.3 /1_H ADEF /14- WARTUN G/ Schmi erst off e/ Sc hmierst of f-Aus wahl _H @ 1\ mod_1271670183002_52. doc x @ 13442 @ @ 1
13.7
Lubricant - Selection
FUCHS
SHELL
ESSO
MOBIL
TOTAL
CASTROL
KLÜBER
Renolit FEP 2
Alvania EP 2
Unirex EP 2
Mobilux EP 2
MULTIS EP2
--
--
Stabylan 5006
--
--
--
--
Optimol Viscoleb 1500
Klüberoil 4UH 1-1500
--
--
--
--
--
--
Wolfracoat 99113
Use
Recommendation
Interval
Load chain
Gear oil
for example: FUCHS RENOLIN PG 220 or
special chain lubricant. Use
NO
grease!
0,2 l
3 month
Use
Recommendation
Interval
Pulleys
FUCHS
RENOLIT FEP2
Acc. to demand
12 month
Use
Recommendation
Interval
Load hook
bearing
FUCHS
RENOLIT FEP2
Acc. to demand
12 month
