Information
4
5.52.291.00.01.01
1 Information
Pos: 5.2.1 /1_HADEF/1--INFORMATION/Allgemein/*Information*/01.Information @ 0\mod_1176734820982_52.docx @ 4653 @ @ 1
The products meet European Union requirements, in particular the EU Machine Directive (2006/42/EG).
The entire company works acc. to a certified quality assurance system as per ISO 9001.
The production of components at our work is subject to strict, intermediate checks.
After assembly, each product is subject to a final test with overload.
For the operation of hoists, the accident prevention regulations BGV D8, BGV D6 and BGR 500 apply in
Germany, amongst others.
The stated performance of the devices and meeting any warranty claims require adherence to all instructions
in this manual.
Before delivery, all products are packed properly. Check the goods after receipt for any damage caused
during transport. Report any damage immediately to the forwarding agent.
This manual allows a safe and efficiently use of equipment. Images of this manual are for a principle
understanding and can be different from the real design.
Pos: 5.2.2 /1_HADEF/---ALLGEMEIN/Hinweise/Prüfungen/HINWEIS - Vorgeschriebene Prüfungen @ 0\mod_1174472067892_52.docx @ 821 @ @ 1
NOTICE!
We refer to the prescribed equipment tests before initial start-up, before putting back into operation and the
regular periodic inspections.
In other countries any additional national regulations must be observed.
Pos: 5.3.1 /1_HADEF/1--INFORMATION/Allgemein/*Hinweise theor.Nutzung -E+P*/02.Hinweise theor. Nutzung @ 0\mod_1175776434366_52.docx @ 3429 @ @ 1
1.1
Indications to determine the used part of the theoretical usage life.
For motor driven units.
The equipment (rope hoists, chain hoists, winches as well as crane hoisting units) are classified in drive
groups (duty classification) according to their intended mode of operation, running times and load collectives
and dimensioned according to the requirements derived from these. (I.e. DIN 15020, ISO 4301/1, FEM
1.001, FEM 9.511). They are thus only designed for a limited period of use with regard to the overall
dimensioning and certification.
After the total period of use as elapsed, measures must be taken where parts are checked and exchanged
as per indication by the manufacturer. After that a new maximum usage period is determined. See also the
accident prevention regulations BGV D 8, winches, lifting and pulling devices.
Pos: 5.3.2 /1_HADEF/---ALLGEMEIN/Hinweise/HINWEIS - Generalüberholung nur durch Hadef @ 0\mod_1176794916616_52.docx @ 4672 @ @ 1
NOTICE!
Commitment
A general overhaul may only be performed by HADEF or by a specialized company, authorized by HADEF.
Pos: 6.1 /1_HADEF/2--SICHERHEIT/*Ü1*/#. Kapitel - Sicherheit @ 0\mod_1172054959462_52.docx @ 172 @ @ 1
