background image

 

 

 

 

5.52.145.00.01.05 

 

 

 

If they are used in the open, protect the units against the effects of weather such as rain, hail, snow, direct 
sunshine,  dust,  etc.  -  we  recommend  to  use  a  cover  in  parking  position.  If  the  device  is  set  up  in  a 
continuously  humid  environment  with  strong  temperature  fluctuations,  the  correct  functionings  are 
endangered by the forming of condensation. 

NOTICE!

 

Use only in the intended atmosphere with a humidity of up to 100%, but not under water! 

 

 

   

DANGER!

 

It is not permitted to use the unit in an area at risk from explosion!

 

 

4.2 

Design 

HADEF  Spur  Gear  Hoists  of  compact  design  are 
monorail trolleys combined with manual hoists. 

With monorail push travel trolley or 

with monorail hand geared trolley 

Operation by hand through hand chain. 

 

Illustration 2

 

 

4.3 

Functions 

The load is lifted or lowered by pulling one of the chain falls of the endless hand chain of the hoist. A load 
pressure brake prevents automatic lowering of the load after releasing the hand chain. 

In  combination  with  hand  geared  trolleys,  the  trolley  is  moved  to  the  left  or  to  the  right  side  by  pulling  the 
hand chain. 

In combination with push travel trolleys the trolley is moved by pushing or pulling the load or, without load, by 
pulling the load chain. 

 

 

NOTICE!

 

The best protection against functional failures in case of extreme environmental impact is the regular use of 
the equipment. 

 

4.4 

Important components 

  Gear 

Gear components are made of high-quality material. 

  Load pressure brake 

Holds the load in any position. Hardened safety pawls. 

  Housing 

Depending on the model made from steel plate or aluminium die-casting (Not for explosion proof equipment). 

In case of ex proof hoists, the housing is only made of steel plates. 

  Load chain 

According to EN 818-7-T high quality chain. All components match precisely to each other. Therefore please 
only use original chains. 

  Load hook 

Forged steel. Rotating, this facilitates attaching the load and avoids twisting of the chain. With safety catch. 

 

 

 

Summary of Contents for 240/12


















Reviews: