Hadeco Smartdop 45 Operating Manual Download Page 42

Page: 42 / 64

you purchased the unit. In case the warranty period is over, please consult the dealer for
a charged service.

*1: Guarantee period of ACP-08: either one year from the date of purchase or within 5

times of autoclave sterilization.

5. Options

5-1. Probe selection

Standard Doppler probes:

2, 4, 5, 8 and 10 MHz (with curled or straight cable)

Flat type Doppler probes:

2, 8 MHz

Sterilizable Doppler probes: 8, 10, & 20 MHz (Amplifier required)

Vascular, lapaloscopic, neurovascular, cardiovascular

Amplifier

Model BDP*MS8 (*: Frequency 8, 10, & 20 MHz)

PPG probe:

Model PG-21

PPG/PV probe:

Model PGV-20 (switchable single channel)

Cuffs:

DVC-1.9, DPC-2.5, VC-10, VC-12

Sphyg

Tubing:

120 cm

3-way stopcock

Smart-V-Link software with communication cable

Smart-Fetal-Link software with communication cable

Headset

5-2. Sterilizable doppler probes

VRP: Vascular, LRP: Lapaloscopic, NRP: Neurovascular,

CRP: Cardiovascular, FDP: Flat, ACP: Autoclavable (up to 5 times)

5-2-1. Sterilization

Only sterilizable probes can be sterilized. Do not sterilize other type of probes including

amplifiers as well as main unit.

Summary of Contents for Smartdop 45

































































Search results

Summary of Contents for Smartdop 45

Reviews:

Brands by name

Popular brands

Hadeco Smartdop 45, Operating Manual

Search results

Summary of Contents for Smartdop 45

Reviews:

Brands by name

Popular brands