Hadeco Smartdop 45 Operating Manual Download Page 13

Page: 13 / 64

• The “DISCHARGE” will be displayed on the

LCD.

• After the discharging completed, charge

process will start automatically and the

“DISCHARGE” will disappear, then charging

indicator will go solid orange.

Note: It takes about 3 hours to fully charge battery.

Battery life is 300 full charges. Contact your dealer

for replacing battery.

2-3. Checking battery level

Battery level indicator shows upper right of the menu

screen.

(1) Turn the unit on and press Enter button to display

the menu.

(2) Battery level indicator shows the battery level in 4

steps as shown right.

(3) Charge the battery when in low.

Low battery indicator

When the battery is low, the low battery indicator will

be shown on bottom right of LCD. Recharge the

battery.

See "2-2. Charging / Discharging Battery"

If battery gets extremely low, the message shown

right will appear upon turning it on to indicate

memory data have been cleared for waveform data,

Battery level indicator

Low battery indicator

70%

Full

Low

30%

Summary of Contents for Smartdop 45

































































Search results

Summary of Contents for Smartdop 45

Reviews:

Brands by name

Popular brands

Hadeco Smartdop 45, Operating Manual

Search results

Summary of Contents for Smartdop 45

Reviews:

Brands by name

Popular brands