X-Pro
Speedcontroller
Dear Customer,
Thank you for your purchase of the
X- Pro-Series Controller,
a new generation of sensorless
speed controllers especially for
’Hacker Brushless A-Series- Motors’
and other Brushless Motor
Designs. Special programming options are provided to ensure the best possible power and
performance from your motor system. ‘
Brushless
’ systems offer high power efficiency combined
with low weight and compact dimensions. For best performance and reliability from your
Controller, use only High quality connectors, motors and batteries.
Please, pay careful attention to the following instructions before you start to work with
your new motor and speed controller.
Connections:
The speed controller can be connected to the motor by direct soldering or with high quality
connectors. Always use new connectors, which should be soldered carefully to the cables and
insulated with Heat-shrink tubing. It is possible to extend the cables to the motor battery pack up
to a maximum of 8 inches. Deans Ultra or other high quality connectors are recommended for
connecting the motor battery pack to the controller.
•
Solder Controller to the Motor wires
•
Solder appropriate connectors to the Battery wires
•
Insulate all Solder connections with Heat Shrink Tubing.
•
Plug the JR connector into the receiver throttle channel.
When connecting controller to battery pack, care should be taken to ensure that multiple touches
of the connectors are not made.
Reversing the motor directions is achieved by the exchanging the position of any two wires
connected to the motor or by programming “rotation reverse”.
Installing the Controller:
Install the speed controller in the model so that it is isolated from vibration and shock, using Velcro
or double sided foam tape. Allow space around it for cooling. Make sure that there is sufficient
cooling of the motor and speed controller by ducting air through adequate cooling holes from the
outside airflow. Main power packs should be connected at one attempt.
Copyright 06/07 – Hacker Motor GmbH 1
