Hacker JETIBOX, Manual

Page: 3 / 20

Manual JetiBox
3
1. Safety and operating instructions
Building and operation of radio controlled models requires technical knowledge, careful handling,
and safety awareness. Inaccurate assemblage as well as carelessness using can result in significant
property and/or personal injuries. For these reasons build correctly, and care about the operating
instructions, when mounting and operating a model with Speed Controllers.
The CE sign guarantees the observance of legal rules for undisturbed operation; however it does not
entitle you to a careless Controller use. JetiBox is developed exclusively for R/C model applications.
Under any circumstances this product may not be used in any man-carrying aircrafts or any other
manned devices.
JetiBox is designed for exclusive operating with batteries. Never use this JetiBox by connecting to a
power supply. Never connect the JetiBox or other propulsion components directly to the domestic
110/230 V / AC current.
In any case keep your body, any other persons, and objects away from the path of a propeller or other
spinning motor parts, while a power battery is connected. Never lean over a running system. Make
sure that no parts can come in touch with spinning drive parts; they could be thrown into your face,
and could also weaken propeller and drive, causing mechanical or electric failures. Protect yourselves
against any dangers coming from propellers and helicopter rotors. Keep anybody, especially small
children, who can be hurt when the engine is running, at least 20 feet away. Mechanical or electrical
damages can cause the motor to run unexpected and unintentionally. Make sure the motor is always
properly mounted even for test runs. Check regularly that all screws of your drive are securely fas-
tened.
Protect the JetiBox against any vibrations, dust, wet, hits or pressures. Check the JetiBox regularly
for damages. Should the electronic device have become wet, only reuse it again after doing a longer
drying phase and an exact examination! Also the
Use device only by outside temperatures between -10°C (14° F) up to +50°C (122° F). Provide suffici-
ent cooling. JetiBox operations are only permitted in no electrostatic surroundings, where no loading
can come true.
JetiBox is not protected against polarity reversions; therefore you must be sure that polarity is cor-
rect when connecting the Speed Controller to the power battery. Connection with reversed polarity
causes destruction of the device. We suggest using connectors which do not allow connection with
reversed polarity mechanically. If you want to reverse the direction of motor rotation, never reverse
battery connecting leads. To change the rotation of the motor, simply swap any two motor wires con-
nections or do it by programming.
For any connection you should use exclusively gold contact plugs and sockets which must be sol-
dered perfectly to the wires. Never use strip connectors, crimp connectors or similar. For safety rea-
sons always use identical products from the same manufacturer. This will minimize connection pro-
blems for example by battery changing. We recommend to use connectors, plugs and sockets from
our accessories assortment.