Hacker JETIBOX, Manual

Page: 15 / 20

Manual JetiBox
15
8. Declaration of conformity
The described products are in compliance with the relevant and applicable EC guidelines for electro-
magnetic compatibility:
89/336/EWG
92/31/EWG
93/68/EWG
9. Protection features
MasterSpin-Speed Controllers are fitted out with a couple of monitoring devices to protect the Speed
Controller as well as to care about the proper use of reception signals.
The protection functions guarantee the correct functioning of Speed Controller and motor in the
whole speed and current area. But they can‘t protect against inadmissible handling and operating
conditions like for example short circuits or a reversed polarity of power battery.
The Speed Controller protections switch the motor off if:
• The Speed Controller reaches a temperature of 100° C (= 215 ° F) This is the basic setup and
can be adjusted with the JetiBox! However, this does not protect against short cuts.
• The battery voltage drops under the minimal operating voltage of the respective type.
• The current drain is strongly distinguish in different phases (asymmetrical load).
Speed Controllers do not have a current monitoring. The protection is only made by tempera
ture monitoring
• If no valid receiver signal is received for more than 3 sec. Besides, the Speed Controllers
processor checks the input after a logical mathematic procedure. If correct impulses are
received again, the motor would be restarted.