![background image](http://html.mh-extra.com/html/hacker/a30-glider/a30-glider_manual_577282005.webp)
Anleitung / Manual Hacker A30 / A40 Glider
© 2013 Hacker Motor GmbH
Seite 5
Excessively high temperatures will destroy an electric motor. These motors are designed for operating
temperatures of the housing up to 65°C (149°F). Temperatures exceeding this value can lead to motor
damage and should be avoided.
Excessive temperatures result from overloading the motor and may arise from using a too pinion, an
obstructed or jammed motor shaft, or excessively long motor startup times. Therefore it is better to
be safe beginning with a smaller pinion and check the motors temperature. Effective cooling must
always be ensured.
Do not run the motor without an adequate load. The motor can be quickly destroyed by excessively
high RPM and free running!
Hacker Brushless Motors are as the name implies brushless motors requiring commutation, i.e. the
conversion of direct current into alternating current, in the speed controller. Consequently they are
intended for use with brushless sensorless speed controllers like the MASTER series and X-series
controllers.
Operating Hacker Brushless Motors with conventional controllers intended for use with brushed
motors, or when directly connected to an energy source like a battery pack or power supply, is
therefore not permitted and will result in the destruction of the motor.
3.
Technische Daten /
Technical data
Modellbau Lindinger GmbH
Modellbau Lindinger GmbH e-Mail: [email protected] www.lindinger.at