9-07
2-12
9-07
2-12
10-01
2-12
16-01
12-05
12-06
Plug the cable
9-07
fully into port 3 of the circuit
board box as shown.
The next step is to fit the cable from the switch
9-07
. The notches on the connector plug should
face downwards, with the yellow wire on the right.
Feed the cable from the motor
2-12
through the
large eyelet on the underside of the upper deck
section
10-01
as indicated by the arrow.
Turn the upper deck around so that you can see
ports 5, 6, 7 and 8 on the other side of the circuit
board box. Identify the cable from the motor
2-12
.
Now take the cable from the elevation motor
16-01
and untie the wire, if you have not already
done so. Bring it around the gearbox
12-05 /
12-06
as shown in the photo.
Plug the cable
2-12
fully into port 6 of the circuit
board box. The notches on the plug face
downwards and the black wire is on the right.
03
. CONNECTING THE TURRET CABLES
05
06
01
02
03
04
29
28
AGORA
MODELS
29
AGORA
MODELS
